12GM

Supported Input Video Formats

(4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60

(UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60

(2K) 2048 x 1080p 50, 59.94, 60

(HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60

(HD) 1920 x 1080i 50, 59.94, 60

(HD) 1280 x 720p 50, 59.94, 60 

(SD) 625i 50

(SD) 525i 59.94

RGB and YCbCr, 4:4:4/4:2:2/, 8/10/12-bit

Note: Raster and Frame Rate Dependent, please see 12GM Video Formats in Documents and Manual.

Video Input Digital

4x 12G-SDI BNC, SMPTE 259/292/424/2081/2082

Single Link 12G/6G/3G/1.5G-SDI

Quad Link 3G-SDI Level A or B-DL (4x 3G), SMPTE-425-5

Dual Link 3G-SDI Level B-DS (2x 3G), SMPTE-425-3

Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425

Quad Link HD-SDI (4x 1.5G)

Dual Link HD-SDI (2x 1.5G), SMPTE-372

Single Link 4K/UltraHD/HD/SD

Video Output Digital

4x 12G-SDI BNC, SMPTE 259/292/424/2081/2082

Single Link 12G/6G/3G/1.5G-SDI

Quad Link 3G-SDI Level A or B-DL (4x 3G), SMPTE-425-5

Dual Link 3G-SDI Level B-DS (2x 3G), SMPTE-425-3

Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425

Quad Link HD-SDI (4x 1.5G)

Dual Link HD-SDI (2x 1.5G), SMPTE-372

Supported Conversions and Functions

Quad 3G-SDI Level A to Single 12G-SDI 

Quad 3G-SDI Level B-DL to Single 12G-SDI 

Single 12G-SDI to Quad 3G-SDI Level A

Single 12G-SDI to Quad 3G-SDI Level B-DL

Quad 1.5G-SDI to Single 6G-SDI 

Single 6G-SDI to Quad 1.5G-SDI 

Quad 3G-SDI Level A to Quad 3G-SDI Level B-DL

Quad 3G-SDI Level B-DL to Quad 3G-SDI Level A   

Two Sample Interleave (2SI) to Square Division (Quadrant) pixel mapping

Square Division (Quadrant) to Two Sample Interleave (2SI) pixel mapping

Pass through of Single Link 12G, 3G, 1.5G and 270M SDI video

Distribution Amplifier support (1x4)

Input signal diagnostics

Input timing analyzer for quad link signals

Cable Equalization

(Belden 1694A coax)

12 Gbps, 70m

6 Gbps, 100m

3 Gbps, 140m

1.5 Gbps, 200m

270 Mbps, 300m

Audio Input / Output Digital

Passes SDI embedded audio, 24-bit, up to 16-channels

User Interface

USB port used with supplied cable and Mini-Config software application to configure device and access diagnostics via macOS or Windows.

Size (w x d x h)

5.76" x 4.02" x 0.90" (146.31 × 102.11 × 22.86 mm)

Weight

0.6 lb (0.3 kg)

Power

5-16 VDC regulated, 12 watts, power supply required, included with purchase

AC Adapter: 100-240VAC, 50/60 Hz, universal input

Environment

Safe Operating Temperature: 0 to 40 C (32 to 104 F)*

Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)

Operating Relative Humidity: 10-90% noncondensing

Operating Altitude: <3,000 meters (<10,000 feet)

*12GM uses approximately 12 watts of power and convection cooling. It will be very warm to the touch, which is normal. When installing the unit, mount in a location where it has access to air for proper cooling. Do not stack the 12GM with other Mini-Converters.