Video Formats
(4K) 4096x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(2K) 2048x1080p 50, 59.94, 60
(HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920x1080i 50, 59.94, 60
(HD) 1280x720p 50, 59.94, 60*
(SD) 625i 50
(SD) 525i 59.94
RGB and YCbCr, 4:4:4/4:2:2, 10-bit
*1280x720p is Level A Only
Note: Raster and frame rate dependent, please see 12G-AMA Video Formats in Documents and Manual.
Video Input Digital
1x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
Single Link SD/HD/2K/UltraHD/4K
Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
Fiber Input
1x 12G-SDI Fiber LC connector, SMPTE 297/259/292/424/2081/2082
Wavelength: Rx 1260 nm (min), 1620 nm (max)
Optical Sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps)
Overload Power: -2 dBm (min)
Video Output Digital
1x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
Single Link SD/HD/2K/UltraHD/4K
Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
Fiber Output
1x 12G-SDI Fiber LC connector, SMPTE 297/259/292/424/2081/2082
Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max)
Optical Power: -5 dBm (min), 0.5 dBm (max)
Extinction Ratio: 5.4 dB (min)
Cable Equalization
(Belden 1694A coax)
12 Gbps, 65m
6 Gbps, 125m
3 Gbps, 190m
1.5 Gbps, 200m
270 Mbps, 405m
Audio Inputs and Outputs
Balanced Analog Audio, 1x 25 pin D female connector on the converter, 4-channels in, 4-channels out
Breakout cable provided with 1x 25 pin D male connector:
4x XLR female input breakout connectors
4x XLR male output breakout connectors
Digital Audio Converters
24-bit
Embedded Audio
SMPTE 272M (SD): 20-bit, 48 kHz synchronous
SMPTE 299M (12G/6G/3G/1.5G): 24-bit, 48 kHz synchronous
Incoming embedded audio can be passed, removed, or overridden
Up to 16 channels supported
Note: 2048x1080p/PsF 29.97 and 30 formats support a maximum of 8-channels embedded audio.
Audio Latency
Embed Path 1100 µsec
Disembed Path 1200 µsec
Analog Audio Levels
Configured via Mini-Config software:
Pro 1: 0 dBfs = +24 dBu
Pro 2: 0 dBfs = +18 dBu
Pro 3: 0 dBfs = +15 dBu
Consumer 1: 0 dBfs = +12 dBu
User Interface
External DIP switch
USB port used with Mini-Config software application to configure the device via PC/Mac
Size (w x d x h)
5.8" x 3.1" x 1.0" (147.32 x 78.74 x 25.4 mm)
Weight
0.6 lb (0.3 kg)
Power
+5-16VDC, 10 watts. power supply required, included with purchase
Environment
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)